Tilbud
Axel Oxygen 2000-BT Digital broadcast console 12 Faders; 5 Mic

Axel Oxygen 2000-BT Digital broadcast console 12 Faders; 5 Mic

3.293,15 EUR 3.395,00 EUR

12 fader digital console with bluetooth, Telco and 5 Mics

Model/Varenr.: AX-OXYGEN 2000-5M-BT
Lagerstatus: Lagervare! Afsendes indenfor 1-3 arbejdsdage
Styk

Axel Oxygen 2000 5 Mics and Bluetooth

Oxygen 2000 is a fully Digital Broadcast Console designed for On Air and Production in any Radio Station: a compact 12 faders unit, 5 microphone inputs with Automix, with a powerful internal audio routing and a wide range of controls and I/O in a rugged and classy steel chassis. Oxygen 2000 DSP based audio processing delivers high-end quality and guarantees latest features and flexibility. Reliable and easy to use as an analogue mixing console Oxygen 2000 offers top class features: Low Latency, Users Preset, Smart Keys, EQ, Compressors, Telephone Hybrid, HDMI Output, Analogue and Digital I/O, USB, Bluetooth, Dante AoIP, Telco, Presenter Talk Box. Oxygen 2000 can be remotely controlled through a dedicated application.

Input & Output

  • 5 microphone inputs with Automix
  • 4 stereo analogue inputs
  • 4 stereo analogue outputs
  • 1 built-in telephone hybrid,
  • 1+4 telco interface with GPIO
  • Bluetooth audio interface (optional)
  • 1 digital Out (AES/EBU)
  • 2 USB audio interfaces (disabled with Dante option installed)
  • 8 stereo inputs + 8 stereo outputs via Dante (optional)

General

  • Fully Digital Broadcast Console for Radio Broadcasting with 6 faders
  • A/B Fast source switch buttons for each fader
  • 4+1 busses (PGM, SUB, Aux1, Aux2, PFL)
  • Near 0 latency (< 0,7 ms I/O)
  • Digital Signals Routing via the 48×48 internal matrix
  • Complete Remote Control by means of an application replicating the surface
  • Remote configuration and maintenance via Web Interface
  • User-definable Presets & Snapshot
  • 5 bands fully parametric Equalizer on every input
  • Dynamic Processor with expander and compressor section on each microphone inputs
  • Advanced and configurable Monitor Facilities for Control Room and Studio
  • Customizable RGB colored buttons
  • High Resolution (120 leds) meter bars for outputs
  • HDMI Out for console status display
  • 2 Timers (Ctrl-Room and Studio microphones timers on HDMI Monitor)
  • TalkBox for guest and presenter (optional)

Versions

  • Oxygen 2000
  • Oxygen 2000 – Bluetooth
  • Oxygen 2000 – Dante
  • Oxygen 2000 – Dante – Bluetooth

Options

  • Talk Box
  • RJ45 adapters for:
    o Mic with GPIO
    o Line In
    o Line Out with GPIO
    o Telco with GPIO

Microphone Inputs

5 microphone inputs with Automix

Mic 1 on XLR, Mic 2-5 on RJ45, all balanced with + 48V Phantom and GPIO

Independent ON AIR Lights and Cut Off control, when opening Control Room and Studio microphones

PFL button switches to private conversation on Hybrid/Telco/Bluetooth mode

Enable TalkBack feature on any Studio or Control Room microphone

Parametric Compressors/Expander (drive, threshold, attack time, release time) for MICROPHONE and MONO inputs

Save and recall microphone presets including Compressor/Expander settings

Phase inversion on microphone inputs

MONO inputs assignable as EXT source

Ducking / AutoFader assignable to all sources (automatic attenuation of music on speech)

Automix

Automix feature simplifies mixing activities in the presence of many guests in the studio.

The function adds, to the existing sources, a new source called Automix, which is the sum of all enabled microphones.

The Automix source has all the features of a microphone source such as:

Studio/Control Room loudspeakers control

Studio/Control Room light control

Can be used as audio in Private mode for phone calls

Using this new source, the user can manage in a very simple manner all the microphones of the studio with a series of benefits:

Just 1 fader for the management of studio microphones;

A dedicated AGC section for each microphone input automatically adjusts the correct level;

Automatic management of attenuation on microphones not in use, simulating a slight closure of the fader;

Final compressor that allows an automatic leveling of the Automix source;

Possibility to use the microphones individually.

This feature further simplifies the work of the mixer engineer, even in the case he/she is also the host of the show.

Available settings in the Automix menu:

MIC-1    ON/OFF

MIC-2    ON/OFF

MIC-3    ON/OFF

MIC-4    ON/OFF (only for consoles with 5 Mic)

MIC-5    ON/OFF (only for consoles with 5 Mic)

Idle Mic Attenuation

Attenuation Attack Speed

Attenuation Release Speed

Compression Threshold

Compression Ratio

Compression Attack Speed

Compression Release Speed

Autogain Speed

Autogain Max Gain

Autogain Max Attenuation

Analogue inputs

Line Stereo Inputs: 4

Balanced on XLR for Line 1, Balanced on RJ45 for Line 2-4

Channel mode selection: STEREO, MONO, L, R, INV-L, INV-R, INV

Stereo-1 & DANTE-1 inputs can be configured as 4 Telco Inputs

USB audio I/O

2 Built-in stereo USB (Type-B) I/O Audio Interfaces allow to directly connect the PC to the Oxygen 2000 console, with no need for audio cards

In facts the PC detects each of the console USB as a digital audio card with 1 stereo inputs and 1 stereo outputs for simultaneous playout and recording

Telephone hybrid and Telco

Telephone Hybrid: 1 POTS/PSTN telephone line with Line.In and Tel.Set connection

Telco: 1 in/out N-1 to connect external telephone hybrid with control via TLC/GPIO

4 mono additional Telco can be obtained configuring Analog Inputs (Stereo-1 & DANTE-1) and (OUT-2 & DANTE-1) stereo outputs.

GPI and GPO management on all 5 Telco channels

RING and HOOK on F1 key for each TELCO channels

N-1 on Telco outputs for all BUS (PGM, SUB, AUX-1, and AUX-2)

Analogue outputs

4 Balanced Outputs:

OUT-1 – XLR – Fixed as PGM

OUT-2 – XLR – by default assigned as SUB

OUT-3 – RJ45 – by default assigned as AUX-1

OUT-4 – RJ45 – by default assigned as AUX-2

OUT-2 stereo output can be configured as N-1 to achieve up to 2 mono additional Telco

OUT-1 & OUT-2 outputs are both equipped with a GPO

Digital output

1 AES/EBU output on XLR

Headphones and local monitor outputs

OUT-2-4 outputs: can be configured as Studio Presenter and Studio Guest Headphones

Unbalanced outputs: 2 Line out on Jack 6.3 for Control Room Headphones

Adjustable maximum Control Room and Studio speakers volume (Studio Speaker only via SW)

Adjustable maximum Control Room and Studio headphones volume (Studio Headphones only via SW)

Adjustable CUT or Attenuation mode (-40, -30, -20, -10 dB) on Control Room and Studio speakers

Independent source selection (PGM, SUB, AUX1, AUX2, EXT) for control room and studio speakers, control room and studio headphones with or without PFL

Independent Talk Back management on Control Room and Studio speakers

Independent Talk Back management on Control Room, Studio headphones

Same source selection for Control Room and Studio headphones, with independent level

GPI/GPO

GPI: 9 in total, for Talk back, Telephone Hybrid or other features

GPO: 9 total, to control OnAir lamps or provide HOOK and RING commands for external telephone Hybrid

User custom GPIs (e.g. Ring, Talkback, channel ON/OFF, etc.)

User custom GPOs (e.g. Hook/ONAIR, Studio-Light, Control Room-Light)

Surface & Management

Automatic firmware update via Internet

WEB UI for Console configuration and service features (Save, restore, update, logs, etc.)

Save and recall EQ presets (up to 10)

New real-time EQ algorithm with graphic

Fast and accurate Led Meters display

Save and recall control panel configuration with 10 Snapshots

Save and recall total console configuration. The configuration can be saved to internal memory (microSD), USB and PC (via WEB interface)

Gain adjustment knobs with adaptive speed

Dimmable buttons light

Adjustable fader ON/OFF threshold (from -50 dB to 0 dB)

Telephone Hybrid and Telco

The built-in telephone hybrid allows direct connection of a telephone line POTS/PSTN on RJ-11C. The audio is processed via DSP that delivers a state-of-the-art audio processing. It’s also available a Telco N-1 in/out, to connect Oxygen 2000 to an external telephone hybrid. The Telco N-1 is always available on RJ45. TLC commands are available on the same RJ45 with Hook and Ring interface.

TLC commands for Telco-2-5 are available and configurable on GPIO-DB9 connector with Hook and Ring.

HDMI output

The HDMI output allows to connect an HD display monitor to the console, suitable to be used in two flavours:

Monitor, that displays the following information:

Audio input source levels

4+1 BUS output levels

A/B source names assigned of 10 channels

Display On-Air sources

Microphone On timer (control room & studio)

Large Clock

Audio output level (Loudspeakers & Headphones)

On-Air microphone

Telephone active

Configure, for configuring all of the device features.

HDMI output combined with 4 rotary knobs allow the fast and intuitive programming of all the mixer parameters.

The programming GUI has been designed in order to be very easy and intuitive.

Selectable home page layouts are available, with many theme icons.

HDMI output can be personalized with the customer logo. Selectable display layouts are available.

Bluetooth

Oxygen 2000 can be equipped with a Bluetooth module. This allows airing the calls made via GSM, Skype, Viber and WhatsApp with a Smartphone, a Tablet or a PC. Oxygen 2000 has two Bluetooth connection modes: bidirectional to support phone calls; monodirectional to put on air high quality stereo audio (A2DP) streamed by Bluetooth sources.

With Bluetooth calls, PFL enables PRIVATE conversation mode.

Bluetooth interface is installed at the factory and must be requested at ordering stage.


Talk Box

It is a device dedicated to the presenter and guests. Talk Box is very simple to connect to the On Air Console: its take 2 RJ45 cables of the length that is needed to connect it to the mixer. It is possible to connect up to 2 Talk Boxes to the Oxygen 2000. The Talk Box offers a direct connection of the microphone and relative On-Air light, it is also possible to directly connect the studio’s On-Air Light. The Talk Box has a headphone amplifier with two 6.3mm outputs. Through the two large backlit buttons it is possible to activate and deactivate your own microphone (On / Off / Cough) or enable Talk back to the console.


Dante AoIP Interface

Oxygen 2000 can be equipped with a Dante interface (also supporting AES67 and SMPTE ST 2110-30 transport protocols) which provides 8 Stereo Inputs and 8 Stereo Outputs on a dedicated Ethernet port, with independent Level Control and Sample Rate Conversion.
On Oxygen 2000 Dante versions the USB I/O ports are disabled.
Dante AoIP interface is installed at the factory and must be requested at ordering stage.


Cable Adapters

RJ45 adapters are available for:
o Mic with GPIO
o Line In
o Line Out with GPIO
o Telco with GPIO

Analog Balanced Microphone Inputs            

Connector        RJ45 & XLR Balanced – EMI Suppressed

Input Impedance                       2,4 KΩ

Nominal Input Level (sensitivity)                      -9/-66 dBu

Max Input Level (clipping point)                        +9 dBu

A/D conversion                           24 bit / 48 Khz

Signal To Noise Ratio (referred to peak level)                           >90 dB

THD+N               <0,01%

Analog Gain     Adjustable +0 ÷ +57 dB (3dB step)

Phantom Power                         +48V

Analog Balanced Stereo Inputs                        

Connector        XLR & RJ45 Balanced – EMI Suppressed

Input Impedance                       10 KΩ

Nominal Input Level (sensitivity)                      0 dBu

Max Input Level (clipping point)                        +18 dBu

A/D conversion                           24 bit / 48 Khz

Frequency response                 +/-0,5 dB from 20 Hz to 20 kHz

Signal To Noise Ratio (referred to peak level)                           >100 dB

Stereo Separation (referred to peak level)   >90 dB

THD+N               <0,002 %

Analog Balanced Telco Input

Connector        RJ45 Balanced – EMI Suppressed

Input Impedance                       10 KΩ

Nominal Input Level (sensitivity)                      0 dBu

Max Input Level (clipping point)                        +18 dBu

A/D conversion                           24 bit / 48 Khz

Signal To Noise Ratio (referred to peak level)                           >100 dB

THD+N               <0,002%

PSTN Interface                           

Connector        RJ11

Transhybrid loss                          >20 dB

Analog Balanced Stereo Outputs                    

Connector        RJ45 Balanced – EMI Suppressed

Output Impedance                    23 Ω, nominal 600 Ω

Nominal Output Level              0 dBu

Max Output Level (clipping point)                    +18 dBu

D/A conversion                           24 bit / 48 Khz

Signal To Noise Ratio (referred to peak level)                           >100 dB

Stereo Separation (referred to peak level)   >90 dB

THD+N               <0,002 %

USB Audio Digital I/O              

Connector        USB Type B – EMI Suppressed

Playback And Recording Sample Rate             SRC 44.1-48 KHz

Resolution       16 bit

Available Stereo Channels      1 Play & 1 Rec for each USB interface

Digital Output

Connector        Balanced on 1 XLR – EMI Suppressed

Input Impedance                       110 Ω

Standard           AES3

Audio Sample Rate                    48 KHz

Resolution       24 bit

Dynamic Range (Converter Values)                 124 dB

Analog Balanced Telco Output                         

Connector        RJ45 Balanced – EMI Suppressed

Output Impedance                    23 Ω, nominal 600 Ω

Nominal Output Level              0 dBu

Max Output Level (clipping point)                    +18 dBu

D/A conversion                           24 bit / 48 Khz

Signal To Noise Ratio (referred to peak level)                           >100 dB

THD+N               <0,002 %

System             

Audio Core       Analog Devices ADAU1452 32bit 294 MHz fixed point DSP

Audio CODECs Cirrus CS42448 24 bit/192 kHz

System Core    Allwinner A20 dual core cortex-A7 at 800MHz, 1GB RAM

LAN Connection                          RJ45 - 100Mbit

Nominal Delay (analog input to analog output)                       0,7 ms

GPIO Inputs/Outputs               4 GPI/4 GPO on DB9; 4 GPI/2 GPO on Mic2 & Mic3 RJ45; 2 GPO on Out3 & Out4 RJ45; 1 GPI/1 GPO on Telco RJ45

Communication Port                 2xUSB type-A, 2xUSB type-B , 1xLAN, 1xHDMI

Operating Temperature          0°C ÷ 40°C

PSU                    

Power Supply 90-260 VAC / 47-63 Hz / 30 W

Dimensions    

Dimensions (W; H; D)               614mm; 80mm; 343mm

Weight              7.1 Kg

Produktets tags

Der er ingen tags registreret.

Mine tags

Kunder der har købt dette produkt har også købt