DEVA DB9000-RX Professional IP Audio Decoder
Premium Rebroadcast, Total Control Exercising
The DB9000-RX is a reliable IP to Audio decoder, designed to support HE-AAC and MPEG-1 Layer 3 compressed audio streams and PCM uncompressed stream for audio transmission without quality loss.
As required in equipment of this class, the DB9000-RX comes with several IP audio sources and a built-in MP3/AAC Backup Audio Player. If the audio signal from the main source disappears, the device will switch to the first available backup source, as per the user-defined source priority; when the Main source returns, the unit reverts back to it.
With the optional Stereo and RDS Encoders added, the DB9000-RX becomes a complete tool for audio rebroadcasting. The stereo encoder processor enables a fully digital composite MPX signal with high stereo to be generated. Thanks to the RS-232 port, the DB9000-RX can be transformed from Ethernet to a RS-232 redirector, allowing the control of any other existing equipment over the Internet. The DB9000-RX can be also managed via any kind of Web browser.
- High Quality HE-AAC (v.1 and v.2) and MPEG-1 Layer 3 Codecs
- 32 kHz, 44.1 and 48 kHz sample rates support
- Support of all standard bitrates and VBR as well
- Shoutcast / Icecast compatible TCP/IP stream client
- Auto switching to another server in the event of a connection loss
- 4 LEDs and Phones output for quick diagnostics
- IP address pronunciation at startup (through the headphones)
- Full Control and easy setup with any web browser
- Entirely Digitally Generated Composite MPX Stereo Signal
- Digital stereo encoder with pre-emphasis, AGC and equalizer
- Fully Dynamic RDS encoder
- UPnP for easy discovery in Local Networks
- Audio Backup on connection or audio loss
- SD Card for Audio Backup Storage
- Ethernet to RS-232 Redirector
- MPX Limiter
For an additional charge, this device is also avalable in version with a fully digital, DSP-based Stereo & RDS Encoder Module.
DB9000-RX is a professional and highly reliable IP to Audio decoder. It comes with an HTML5 based web server for device management and Ethernet to a RS-232 Redirector, enabling quick integration of the existing audio systems to the Internet. The device is available with an optional fully digital, DSP-based Stereo & RDS Encoder Module.
Supporting the compulsory for this high class equipment HE-AAC versions 1 and 2, MPEG-1 Layer 3 compressed audio streams and PCM uncompressed stream, the DB9000-RX can be used for a scope of professional audio applications: Broadcast, Internet Radio, Studio to Transmitter Link and VoIP.
The powerful DSP processor and either digital or analog output signals allow for the decoding process to be accomplished in real time which makes the device compatible with any online radio system, including Icecast and Shoutcast. Another impressive addition to DB9000-RX features is the low latency Real Time Protocol (RTP) connection support.
Along with its main IP audio source DB9000-RX comes with several IP audio sources and a built-in MP3/AAC Backup Audio Player for higher stability. The device has a built-in FTP server and 2GB SD card where the audio content for the MP3 Player is recorded. The backup audio files can be easily managed anytime remotely via any FTP client.
If the audio signal of the main source disappear, the device will switch to the first available IP audio backup source. If none of the audio backups are available then the MP3 Player starts. While when the main audio signal is recovered, DB9000-RX will automatically switch back to it. Depending on your needs, the sequence of the backup audio sources can be easily changed.
Specifications
Audio decoder
Decoder HE-AAC (v.1 and v.2), MPEG-1 Layer 3 or raw PCM
Sample rates 32, 44.1 and 48 kHz
Bit rates All standard bit rates, including VBR
Audio backup
Trigger Connection loss or audio silence
Threshold Adjustable, -90dBFs to 0dBFs
Trigger time Adjustable, 1s to 240s
Storage SD Card, up to 2GB
Supported encoders HE-AAC (v.1 and v.2), MPEG-1 Layer 3
Supported file types *.MP3, *.AAC, *.M4A, *.M3U
Playback modes Alphabetical ascending and descending, Shuffle, Playlist and Shuffled playlist
Remote file management Build-in FTP server
Analog audio output
Connector 2 x XLR, Balanced
Frequency response ±0.5dB, 5Hz-20kHz
Distortion <0.01% THD+N
Level +12dBu, user selectable
Sample rate Same as the source stream
Dynamic range >100 dB
Digital audio output
Connector XLR
Type AES/EBU (IEC 60958)
Sample rate 48 kHz
Resampling Thru build-in sample rate converter
Stream client
Type Shoutcast/Icecast compatible TCP/IP client
Codec Support AAC, MP3, PCM
Servers Up to 3 with auto-switch on failure
RTP Receiver
Type Unicast RTP/UDP compatible receiver
Count 1
Codec AAC, MP3
Stereo encoder (option)
Type Fully DSP stereo encoding
Pre-emphasis 0, 50, 75µs
AGC 5 presets, 2 user defined
Equalizer 3-Band, ±12dB range
Stereo separation >55dB (typically >60dB)
Phase Adjust Pilot, L-R, RDS
Injection Levels Adjust Pilot, RDS
Output Connector BNC, Unbalanced
Output Level Adjust Digitally, up to 0dBu
Composite MPX Limiter 6 presets, 3 user defined
RDS encoder (option)
Supported RDS Applications PI, PS, Dynamic PS AF, RT, TP, TA, DI, M/S, PIN, PTY, PTYN
Configuration Web interface
Automation control Remote TCP console
Output Connector BNC, Unbalanced
Output Level Adjust Digitally, up to -6dBu
Phones audio output
Connector 1/4" (6.3mm) Phone Jack, Stereo
Type Headphones
User interface
Indicators 4 LEDs on front panel, 2 LEDs on rear panel
Web interface Full control and status information
RS-232
Type TCP/IP to RS-232 Redirector
Connector DB-9
Baud rates 9600 to 115200
Password protection Yes
Network
Connector RJ-45
Type Ethernet
Device discovery UPnP support
Operating conditions
Temperature 10°C - 45°C
Humidity < 75%, non-condensing
Power
Voltage 115/230V AC (internal switch)
Power Consumption 10VA
Connector IEC320, Fused and EMI-suppressed
Size and Weight
Dimensions (W;H;D) 485 x 44 x 180 mm
Shipping Weight 540 x 115 x 300 mm / 2.673 kg
HS Code 8517620000
DB9000-RX TYPICAL APPLICATIONS:
1. Audio Transmission over IP-based networks (DB9000-TX or DB90-TX is required at the opposite site)
2. Audio Transmission over IP-based Point-to-Point Wireless Link
3. MultiPoint Audio Transmission over IP-based networks
4. Low delay Real time Audio Transmission
In line with the latest technology, one or more DB9000-RX devices in combination with an encoder, (such as DB9000-TX and DB90-TX, for an instance) offer a full sound solution for long distance wireless needs.
Titel | Type | Størrelse | Download |
---|---|---|---|
DB9000RX_Brochure.pdf | 536.58KB | Download |
Kunder der har købt dette produkt har også købt