RB-SYW Sync Board for RB-SC2
There are two optional video sync boards which can be used to synchronise the outputs of the RB-SC2 to a 48kHz sample rate:
the RB-SYA and the RB-SYD. There are four optional video sync boards which can be used to synchronise the outputs of the RB-TGHD(B & X): the RB-SYA, RB-SYD, RB-SYE AND THE RB-SYW.
RB-SYA Analogue Video Sync Board
The Analogue video sync board will accept a composite signal of NTSC (525), PAL (625) & SECAM (625) signals covered by SMPTE-170-M (NTSC) and ITU-R BT.470-6 (PAL & SECAM
RB-SYD Digital Video Sync Board
The Digital video sync board will accept 270Mbps SD-SDI and HD-SDI signals covered by SMPTE-259-M-C (SD) and SMPTE-292M (HD).
RB-SYE Sync Board
The AES/EBU sync board will accept a digital audio input signal with a sample frequency between 32kHz and 192 kHz. When using the RB-SYE sync board, the Channel Status information that is encoded in the input data signal is copied to all digital output channels on the RB-TGHD.
RB-SYW Sync Board
The Audio Clock sync board will accept a distributed clock running at the desired sample frequency between 32 kHz and 192 kHz. Thesignal can be differential or single ended TTL level.
RB-SYW Sync Board.
