JK Audio AutoHybrid
Auto-Answer Hybrid
Not Just Another Half Duplex Auto-Coupler.
This simple, passive, auto-answer/disconnect telephone line hybrid allows simultaneous send and receive audio through analog telephone lines. Suitable for monitoring remote locations, IFB feeds, and many simple studio, conferencing, and PA telephone interface applications.
Features:
- Enable/disable auto-answer
- Hybrid null adjust (up to 20 dB separation)
- Front panel off-hook LED
- Send XLR line input
- Caller XLR line output
- Remote control terminals
- Rack mountable
- Passive design (no battery or AC required)
- Made in America
- Approved for sale in Europe and Australia
Full Duplex
Yes, you can send and receive audio at the same time. The dual transformer hybrid is capable of 20 dB nominal trans-hybrid loss. In other words, your transmit signal will appear mixed with the receive signal, but at a level 20 dB lower than it was sent into the phone line.
Auto-Answer
The "Auto" feature is very simple. When the "Auto" switch is selected, AutoHybrid will answer on the first ring. The phone line will remain off-hook, until either the Drop button is depressed, or until the phone company releases the line.
Specifications | |
Input | Female XLR |
Impedance | 1k ohms |
Level | 500 mV RMS (-4 dBu nom, +6 dBu max) |
Insertion Loss | 11dB Send XLR to Phone Line |
Output | Balanced Male XLR |
Impedance | 600 ohms |
Level | 200 mV RMS (-12 dBu nom) |
Misc | |
Screw Terminals | Off-hook Control (+5VDC Momentary) Release Control (+5VDC Momentary) OH LED Signal (pulled to ground on OH) |
Phone Line | RJ11C |
Aux Phone | RJ11C |
Isolation | 1500 VAC |
Ringer | 0.8B REN |
Frequency Response | Telephone Side 200 Hz - 3600 Hz |
Size | 4” x 5” x 1.5” (10.5 x 13 x 4 cm) |
Weight | 12 oz. |
Titel | Type | Størrelse | Download |
---|---|---|---|
JK-Audio-AutoHybrid-Datasheet.pdf | 211.93KB | Download |