Prodys Quantum Lite SET - portable handheld codec + Quantum2 ST +Bag

Prodys Quantum Lite SET - portable handheld codec-new Quantum2 ST and Bag

1. Prodys Quantum Lite is Prodys’s handheld audio codec for professionals!

This device enables extreme reliable field audio contributions over wireless networks by means of concurrent use of two UMTS /LTE network connections.

No risk since double SIM operation is enabled.

No risk due incoming GSM calls disturbing your smartphone codec app.

No risk since large battery capacity is provided.

No risk since professional XLR microphones might be directly used.

No risk since input & output volume and cue balance got true professional knobs.

Quantum Lite might combine up to 4 uplink IP connections: 2x UMTS/LTE, 1x Ethernet & 1x Wi-Fi  for any scenario.

This device turns also off-line jobs in easy tasks with embedded audio recording, edition and transfer.

Features:

AUDIO

• Low delay audio encoding with Opus & Aptx (G722 and MPEG Layer II optional).
• XLR mic/line input. Headphone output.
• 2nd stereo audio input /output.
• stereo USB audio input /output.
• 3x push-lock audio controls for mic, local headphone and return signal control.

COMMUNICATIONS

• Inherits world-class IP technology from the Prodys Audio/Video codec family (BRAVE protocol) with full error correction method and Bonding or Diversity.
• SIP and SIP Diversity according to N/ACIP EBU Tech 3326 and 3368 (Optional).
• Double UMTS /LTE operation. (Double SIM registration).
• 1x Ethernet interface.
• Wi-Fi interface.

OPERATION

• Hand-held reporter codec.
• User friendly interface via touch panel. Intuitive handling.
• Large autonomy battery.
• Audio recording on SD memory, playback, edition and file transfer.

Technica data:

Dimensions & Weight

• Width: 177mm; Height: 43 mm; Depth: 93 mm.
• Weigth with battery : 580 g.

Power Supply & Battery

• 1x Li-pol battery (autonomy 4h) (+ optional spare batteries).
• 1x VDC input (operation & charging).

User interface

• 1x capacitive touch panel 95 x 55mm.
• 1x remote web control.

Audio inputs /outputs & controls

• 1x XLR microphone /line input with phantom.
• 1x headphone mini jack output Ø3.5mm.
• 1x line level stereo input mini jack input Ø3.5mm.
• 1x line level stereo output mini jack input Ø3.5mm.
• 1x stereo audio USB input /output port.
• 3x push-lock controls for mic, local headphone and return signal control.

Communications

• 2x integrated UMTS /LTE modems (micro SIM slots).
• 1x Ethernet port (10/100BaseTx Ethernet, RJ45 connector).
• 1x USB port
• BRAVE protocol with bonding or diversity.
• SIP and SIP Diversity protocols according to N/ACIP EBU Tech 3326 and 3368 (optional).
• OPUS & APTX audio compression. (G722 and MPEG Layer II optional).

Other functions

• 1x audio recording on removable SD memory (micro SD slot).

2. Prodys Quantum2 ST

Quantum2 ST is an advanced 1U rack mount IP audio codec for connecting studios to transmitters, studios among themselves and with OB vehicles.

Quantum2 ST is available in single and dual stereo versions.

Quantum2 ST provides steady and highly reliable audio links using diversity streams. Point to multipoint distribution is supported (multi-unicast 1:10)

or unlimited with multicast protocol.

Dante/AES67 or Ravenna/AES67 is available to provide an interface for uncompressed digital audio over a single Ethernet cable replacing all the

individual audio inputs and outputs.

This unit can be controlled from its built-in web graphical interface, its front panel display menu, or from the ProdysControlPlus application.

The new WEBMONITOR is also available to listen to the unit’s audio from ProdysControlPlus or an Internet browser on a distant location. This makes the

equipment fully manageable remotely, facilitating the work of supervisors.

Features: 

AUDIO

• Available with One or Two Stereo Audio Inputs/Outputs with XLR connectors.
• Analog and Digital (AES/EBU) outputs and inputs.
• Supports Mpeg1/2 LayerII, AAC, apt-X, G711/G722, OPUS and PCM.
• Optional Dante/AES67 or Ravenna/AES67 to provide an uncompressed digital audio interface in a single Ethernet cable.

COMMUNICATIONS

• Inherits world-class IP technology from the Prodys Audio/Video codec family:
  – Automatic Jitter buffer. This adjustable buffer avoids audio dropouts in the IP connection.
  – Automatic synchronization adjustment with the transmitter site rate, to give a constant delay in IP communications.
  – Prodys NAT Traversal Streaming Protocol permits router firewall pass-through with zero configuration.
  – Prodys Real time Network Analyzer to monitor critical network parameters in real time during the connection.
  – FEC (Forward Error Correction). Up to 24 different schemes are available, to fit to the desired delay and available bandwidth.
  – Error Concealment mechanisms on Mpeg audio modes are supported to reduce the impact of packet losses.
• 2 x Ethernet interfaces: Either to split streaming and control or for bonding/diversity 2 IP links.
• Wi-Fi interface 802.11b/g/n compatible Bonding or diversity with Ethernet.
• IP Compatibility: SIP/SDP/RTP/STUN protocols are supported according to the standard defined by the N/ACIP project within the EBU group.

OPERATION

• User friendly interface via touch panel, built-in Web Server or ProdysControlPlus application.
• User Access Control to define different access restrictions in a per user basis.
• Configuration presets to define different configurations for all or some specific parameters.
• Alarms: Real Time alarms management.
• Serial port to transmit/receive ancillary data along with the audio.
• GPIO port: 7 inputs/outputs. User configurable with multiple functions such as remote contact closures.
• Local or remotely (TCP/IP) upgrading of one or several units at once using the same utility. Factory software upgrades can be downloaded.
• WEBCALL license to provide ad hoc audio links from Internet browsers in laptops and smartphones.
• WEBMONITOR license for remote audio monitoring.

Technical data:

2 x AES/EBU Stereo Input/Output

• Available with one or two Input/Outputs (XLR connectors).
• AES/EBU: EIAJ CP-340 type I/IEC-958 Pro
• Rate Converter: 1:3 to 3:1.

2 x Analog Stereo Input/Output

• Available with one or two Input/Outputs (XLR connectors).
• Maximum level: +22 dBu.
• Input Impedance: 20 Kohm.
• Output Impedance: 50 ohm.

Audio Compression

• PCM (16,20 & 24 bits)
• G722, G711 A/μ Laws
• MPEG 1,2 Layer II
• OPUS
• Enhanced and Standard apt-X™
• MPEG AAC LC, LD, ELD & HE (optional).

LAN

• 2 Ethernet ports for bonding, diversity or splitting control and stream.
• 10/100/1000BaseTx Ethernet, RJ45 connectors.
• TCP/UDP/IP, Multicast & Unicast.
• DHCP, SNMP, DNS, SNTP, SMTP, HTTP, IGMP, ICMP, VLAN (optional).
• SIP/SDP/RTP/STUN comprising Tech 3326 & 3368 EBU N/ACIP standard.
• FEC as per RFC 2733.
• Error Concealment.
• Prodys NAT Traversal Streaming Protocol.

GPIO and RS232 Ports

• 7 General Purpose Inputs/Outputs.
• User configurable. Remote contact closures.
• 1 serial port (DB9F connector).
• Tx and Rx of ancillary data along with the audio.

Power Supply

• 90 – 250VDC [@ 47-65Hz]. Power consumption less than 50W (average ~20W)

Dimensions & Weight

• 1U x 19” rack system: 43.4 x 482.5 x 180mm (H x W x D)
• Weigth : 2.4 Kg.